
![]()
Status Instruments Software & Configuration Guide
|
PRODUCTS |
SOFTWARE |
HARDWARE |
||||
|
USB_LINK |
USB_SPEED_LINK |
M-Config |
USB Cable |
USB KIT |
RCP2 KIT |
|
| ..SEM161 | X | X | ||||
| ..SEM162 | X | X | ||||
| ..SEM205 | X | X | ||||
| ..SEM205X | X | X | ||||
| ..SEM210 | X | X | ||||
| ..SEM206 | X | X | ||||
| ..SEM215 | X | X | ||||
| ..SEM310 | X | X | ||||
| ..SEM315 | X | X | ||||
| ..SEM710 | X | X | ||||
| ..SEM1600T | X | X | ||||
| ..SEM1600VI | X | X | ||||
| ..SEM1603P | X | X | ||||
| ..SEM1603TC | X | X | ||||
| ..SEM1603I | X | X | ||||
| ..SEM1610 | X | X | ||||
| ..SEM1620 | X | X | ||||
| ..SEM1630 | X | X | ||||
| ..SEM1633 | X | X | ||||
| ..SEM1700 | X | X | ||||
| ..TTR200 | X | X | ||||
| ..TTC200 | X | X | ||||
| ..HTR200 | X | X | ||||
| ..HTR200V | X | X | ||||
** Instructions on how to load USB_LINK and USB_SPEED_LINK Software on to your computer: INSTRUCTIONS
|
..The below models are configured by a simple Push Button procedure using the appropriate sensor simulator: |
|
....SEM203P |
| ..The below models are configured by a simple Push Button procedure: |
| ....DM640P ....DM640TC ....DM700I ....DM720 |
| ..The below units are configured using the MED2922 Converter with the M-Config Software: |
| ....MEDACS Modules (MEDACS 21XX to 24XX) |
| ..The below units are configured by the factory: |
| ....DM3600U & DM3600A |
| Signatrol Software | |
| TempIT |
Download the
self-extracting installation file to a temporary location and run
it. Note: If you plan to use TempIT Pro software with a Dongle connect the Dongle to your computer AFTER loading the TempIT V4 software onto your computer. |
| Call (800) 700-3272 for literature and pricing. If you prefer to ask for information via the internet use the "REQUEST INFO" button at the top of this screen or e-mail = bm@statinst.com. |
© 1997-2011 Status Instruments, Inc. - All Rights Reserved